Forestry mulching heads for 8-16 T excavators with 360° mobile hammers
Mulching heads with 360° mobile hammers on shovel. Designed for shredding grass, bushes and branches up to 14 cm in diameter.
Forestry shredders with 360° rotating hammers that can be fitted to excavators. Specially designed to mulch grass, bushes and branches up to 14 cm in diameter, these mulching heads can be fitted to excavators from 8 to 16 tonnes and offer excellent performance thanks to a helical rotor fitted with 360° rotating hammers and two lines of U-shaped counter-knives for optimum mulching.The hydraulic rear door with cylinder facilitates maintenance and unloading of shredded material, while the housing protects the hydraulic motor for increased durability. Lateral belt drive ensures constant power, while grease-free joints with self-lubricating bushes reduce maintenance requirements. The axial piston engine with two-position displacement and drainage ensures reliable performance.For safety, a curtain of chains at the front and a rubber flap at the rear prevent splashing. Wear-resistant steel pads and sheathed hydraulic hoses complete this robust, high-performance product.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
Main Features
- For excavators from 8 to 16 Tons.
- Helical rotor with 360° moving hammers and 2 lines of ''U-shape'' counter-knives for optimum shredding.
- HBC system (Hydraulic Block Control) allowing the hydraulic flow regulation, limits the pressure and allows rotor progressive braking.
- Hydraulic rear trap with cylinder to release the waste.
- Casing for the hydraulic motor.
- Side drive by belts.
- Articulations without grease points (selflubricating rings).
- Axial piston engine with 2-position displacement and drainage.
- Front protection with chains to avoid projections. Rear protection with rubber flap.
- Support pads with interchangeable and anti-wear material.
- Anti-jet sheath for hydraulic hoses.
Technical characteristics
| Model |
| Excavator weight |
| Rotor type |
| Number of hammers |
| Counter-knives line |
| Crushing width |
| Shredding Ø |
| Helical rotor |
| Rotor diameter |
| Cylinder capacity |
| Drive |
| Oil flow recommended Oil flow max. |
| Pressure |
| Dimensions (L x W x H) without hitch |
| Weight (*intermediary linkage incl.) |
| XYLOR 1013 PE |
| 8 to 13 Tons |
| 360° mobile hammers |
| 18 |
| 2 |
| 1000 mm |
| 140 mm |
| Yes |
| 420 mm |
| 2 postitions : 35 or 46 cm³ |
| 4 belts |
| 85 to 110 l/min 240 l/min. |
| 250 bar |
| 0,86 x 1,35 x 0,65 m |
| 460 kg |
| XYLOR 1213 PE |
| 8 to 13 Tons |
| 360° mobile hammers |
| 22 |
| 2 |
| 1200 mm |
| 140 mm |
| Yes |
| 420 mm |
| Variable 35 or 46 cm³ |
| 4 belts |
| 85 to 110 l/min 240 l/min. |
| 250 bar |
| 0,86 x 1,55 x 0,65 m |
| 530 kg |
| XYLOR 1413 PE |
| 9 to 16 Tons |
| 360° mobile hammers |
| 26 |
| 2 |
| 1400 mm |
| 140 mm |
| Yes |
| 420 mm |
| Variable 35 or 46 cm³ |
| 4 belts |
| 85 to 110 l/min 240 l/min. |
| 250 bar |
| 0,86 x 1,75 x 0,65 m |
| 600 kg |
