Wood chippers on tractor/on hydraulic forwarder : VEGETOR 110 T et H
Wood chipper / shredder adaptable on small tractors from 15 to 35 HP. Chops all types of wood, for all types of jobs!
Adaptable to low-power tractors, the wood chipper VEGETOR 110 T is nevertheless equipped with significant power for chipping wood up to 110 mm in diameter.
An essential tool for recycling and reducing green waste in small to medium volumes, it is driven by the tractor's power take-off or by an independent hydraulic unit, ideal for cooperative use, for example. This unit allows the chipper to be hitched to different tractors without the risk of damaging the carrier's pumps.
For added versatility, the wood chipper VEGETOR 110 has a model 110 H that can adapt to all types of hydraulic carriers such as loaders, mini-excavators, track carriers... Often used for their ability to perform a multitude of tasks, these carriers are enhanced by the VEGETOR 110 H, allowing work in areas less suited to tractors.
Like other models in the VEGETOR range, this wood chipper features a 5in1 rotor with three cutting systems that can be adjusted based on the type of wood and desired wood chip.
This RABAUD chipper is an ideal choice for environmentally friendly and efficient management of green waste, transforming it into compost, mulch, wood chips, wood fiber, etc.
An essential tool for recycling and reducing green waste in small to medium volumes, it is driven by the tractor's power take-off or by an independent hydraulic unit, ideal for cooperative use, for example. This unit allows the chipper to be hitched to different tractors without the risk of damaging the carrier's pumps.
For added versatility, the wood chipper VEGETOR 110 has a model 110 H that can adapt to all types of hydraulic carriers such as loaders, mini-excavators, track carriers... Often used for their ability to perform a multitude of tasks, these carriers are enhanced by the VEGETOR 110 H, allowing work in areas less suited to tractors.
Like other models in the VEGETOR range, this wood chipper features a 5in1 rotor with three cutting systems that can be adjusted based on the type of wood and desired wood chip.
This RABAUD chipper is an ideal choice for environmentally friendly and efficient management of green waste, transforming it into compost, mulch, wood chips, wood fiber, etc.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Wood chippers on tractor/on hydraulic forwarder : VEGETOR 110 T et H
Main Features
- Maximum wood diameter 110 mm.
- Suitable for low-power tractors from 15 to 35 HP (80 HP with friction limiter).
- PH version : feed roller driven by the tractor's hydraulic pump.
- CH version : feed roller driven by independent hydraulic unit. - Rotor ''5in1'' (2 knives + 2 rows of 8 hammers).
- Very wide feeding roller to centre the branches and ease the cut of forked woods - RABAUD EXCLUSIVITY.
- Adjustable speed of the feeding rollers for increasing or reducing the size of shavings.
- NOSTRESS regulation.
- Secure machine : 4-position safety bar and emergency stop with reset button.
- Manual 230° swivel discharge chute with adjustable cover.
Technical characteristics
| Model |
| Maximum wood diameter |
| Opening (W x H) |
| Feeding roller |
| Roller width |
| Hydraulic adjustment of the rotor speed |
| Rotor type |
| Rotation speed of the rotor |
| NOSTRESS device |
| Blower |
| Coupling |
| Drive |
| Transport dimensions (L x W x H) |
| Work dimensions (L x W x H) |
| Weight |
| Production per hour (estimated) |
| VEGETOR 110 T-PH |
| 110 mm |
| 212 x 100 mm |
| 1 horizontal toothed convergent |
| 406 mm |
| Hydraulic via external control knob |
| The "5in1" rotor |
| 2600 rpm |
| Yes (serial) |
| 230° rotation with adjustable head |
| Tractor from 15 to 35 HP (80 HP with slipping clutch) No. 1 pin 3-point linkage |
| PTO 540 rpm + Hydraulic pump 16L/min |
| 2,19 x 0,93 x 1,54 m |
| 2,19 x 1,24 x 1,75 m |
| 315 kg |
| 3000 kg (9 MAP) |
| VEGETOR 110 T-CH |
| 110 mm |
| 212 x 100 mm |
| 1 horizontal toothed convergent |
| 406 mm |
| Hydraulic via external control knob |
| The "5in1" rotor |
| 2600 rpm |
| Yes (serial) |
| 230° rotation with adjustable head |
| Tractor from 15 to 35 HP (80 HP with friction limiter) No. 1 pin 3-point linkage |
| PTO 540 rpm |
| 2,19 x 0,93 x 1,54 m |
| 2,19 x 1,24 x 1,75 m |
| 335 kg |
| 3000 kg (9 MAP) |
| VEGETOR 110 H |
| 110 mm |
| 212 x 100 mm |
| 1 horizontal toothed convergent |
| 406 mm |
| Hydraulic via external control knob |
| The "5in1" rotor |
| 2600 rpm |
| Yes (serial) |
| 230° rotation with adjustable head |
| Adaption by your own on loaders |
| Oil flow mini 45 L/min, max 150 L/min - Pressure 200 bar max |
| 1,45 x 0,87 x 1,50 m |
| 1,95 x 1,18 x 1,55 m |
| 275 kg |
| 3000 kg (9 MAP) |
