Weeding brush for arboriculture : ARBONET
Ideal for mechanical weeding and complete cleaning of orchard paths.
Adaptable to the front or rear of a tractor, on the right or left, this rotary weeding brush for vineyards allows weeding directly at the base of the rows thanks to its two offsets. For precise and effective weeding, the rotary brush on the ARBONET tractor offers an offset of 1.75 meters: 0.85 cm offset from the attachment and 0.90 cm offset through the telescopic arm.
Its built-in motor allows it to easily maneuver at the base of the vines without damaging them.
Thanks to a hydraulic compensation system, work on uneven terrain or at the base of trees is entirely possible. Mechanical compensation can be chosen for flatter terrain. A cup under the brush allows adaptation to all types of soils and is adjustable to follow the wear of the brush.
This brush, with a diameter of 1100 mm, is available in flat steel fiber for, for example, catch-up work, or in steel coated with rubber for soil maintenance, windrow creation, or cleaning.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Weeding brush for arboriculture : ARBONET
Main Features
- Mechanical weeding at the foot of the rows
- 1.75 m offset (0.85 m from the tractor axle + 0.90 for the telescopic arm)
- Ø1100 mm rubber-coated steel brush or 100 % steel one
- Possibility to mount it at the rear or at the front of the tractor, on the right or on the left side (to precise upon order)
- Adjustable head, fitted with a height adjusting cup.
- Encased motor for compact design (410 mm high at work).
- Only a 2 dual-acting valve is needed
- Compact machine (2.30 m width)
Technical characteristics
Model |
Coupling |
Oil flow (recommanded) |
Pressure |
Dimensions (L x W x H) |
Offset |
Weight |
Brush |
tilting left/right |
tilting front/back |
Brush rotation speed |
Recommended speed at work |
ARBONET 1100 |
3-point N°1 and N°2 |
30 l/min up to 60 l/min maxi (40 l/min) |
200 bar max. |
1,47 x 2,30 x 0,96 m |
1,75 m (0,85 m from tractor axle + 0,90 m for the telescopic arm) |
245 kg |
Brush Ø 1100 mm / Rubber coated steel fibre |
12° / 15° |
+/- 28° |
160 rpm (at recommended flow rate) |
from 5 to 8 km/h |