Vibrating post driver : VIBRESCOPIC III VITI
Post driver for hard soils. Equipped with a pointed tip for pre-holes with automatic positioning under the striking head.
The VIBRESCOPIC III VITI is adapted for driving posts in viticultural regions characterized by soils rich in limestone, known for their difficulty to work with.
This machine is a percussion post driver model, equipped with a pilot bit for pilot holes with automatic positioning under the striking head. This device aims to simplify and optimize the process of installing posts for vineyards by eliminating the need for pilot holes with additional equipment.
The automatic pilot bit integrates with the hammer of the percussion post driver. At rest, the pilot bit is housed between the mast and the striking head (hammer). When the operator activates two horizontal hydraulic cylinders, the pilot bit automatically positions itself under the striking head. This allows for the creation of a pilot hole to drive the posts into the ground with ease.
The use of this equipment offers a multitude of advantages. Firstly, it allows for the creation of pilot holes in difficult soils, even those rich in limestone. Moreover, this system enables the creation of pilot holes and the placement of posts in a single operation, significantly reducing the time and labor required to perform these tasks. Additionally, it ensures safe work, providing 100% operator protection through remote control from the driver's seat or the electrohydraulic control that the operator can wear with a harness.
This machine is a percussion post driver model, equipped with a pilot bit for pilot holes with automatic positioning under the striking head. This device aims to simplify and optimize the process of installing posts for vineyards by eliminating the need for pilot holes with additional equipment.
The automatic pilot bit integrates with the hammer of the percussion post driver. At rest, the pilot bit is housed between the mast and the striking head (hammer). When the operator activates two horizontal hydraulic cylinders, the pilot bit automatically positions itself under the striking head. This allows for the creation of a pilot hole to drive the posts into the ground with ease.
The use of this equipment offers a multitude of advantages. Firstly, it allows for the creation of pilot holes in difficult soils, even those rich in limestone. Moreover, this system enables the creation of pilot holes and the placement of posts in a single operation, significantly reducing the time and labor required to perform these tasks. Additionally, it ensures safe work, providing 100% operator protection through remote control from the driver's seat or the electrohydraulic control that the operator can wear with a harness.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Vibrating post driver : VIBRESCOPIC III VITI
Main Features
- Drive posts in all types of grounds, thanks to the exclusive power regulation of the stricking controlled (from 0 up to 950 strokes/min) by the user.
- Drives posts from 0.60 up to 3 m length and without setting.
- Works in all positions : hydraulic offset, 30° hydraulic tilt and 200° hydraulic rotation.
- The 0.50 m hydraulic offset at hammer level means that existing vegetation is preserved = ideal for renovating fences.
- Self-positioning trowel : the trowel is automatically positioned under the striking head.
- Small size during transport and operation (telescopic mast).
- Exceptional precision: the stake is guided all along the ramming process.
- The machine does not damage the poles : the power is regulated.
- Sturdy, forged, milled and processed striking head, Ø 150 mm : 2 years warranty.
- Provides an excellent safety : the hammer vibrates only when the post is in direct contact with the striking head.
- Manual controls by lever or radio remote control, or electro-hydraulic controls.
Technical characteristics
| Model |
| Post length (mini. / maxi.) |
| Striking head Ø |
| Percussion hammer |
| Hydraulic offset |
| Hydraulic tilt (in/out) |
| Hydraulic rotation |
| Dimensions (L x W x H) |
| Weight (without option) |
| Drive |
| Coupling |
| VIBRESCOPIC III VITI + AUTOMATIC HOLE BAR |
| 0,60 m / 3,00 m |
| 150 mm |
| Adjustable from 0 to 950 strokes/min |
| 0,50 m (1.26 m max. from the tractor axle) |
| 15° inside / 15° outside |
| 200° (ROTARY version) |
| 1,16 x 1,74 x 2,63 m |
| 735 to 755 kg |
| Tractor hydraulic pump with 2 couplings or PTO 540 rpm, flow 35 l/min single-body pump (35 + 17 l/min double-body pump) - 40 L tank |
| Tractor 3-point linkage cat. n°2 with removable pins |
