Vibrating post-driver on stilt tractor : VIBRESCOPIC MAV
Post driver adaptable to narrow tractors, grape harvesters, tool carriers, etc.
RABAUD offers vine growers a range of post drivers adaptable to grape harvesting machines, straddle tractors, multifunctional arms, or even a versatile mast. And this for all brands: NEW HOLLAND, PELLENC, STILTOR, PROVITIS...
This choice of adapting the post driver to the carrier helps reduce the number of equipment or the creation and maintenance of vineyards.
It has been designed to adapt to the toughest soils thanks to a percussion hammer device with a power of 0 to 950 strokes/min, adjustable by the operator. The impact is triggered when the hammer, mounted on a cylinder and sliding along a slide, comes into contact with the post.
Its striking bell with a Ø of 150 mm guides the post throughout the driving process without damaging it.
The mast is tiltable by 20/25° to correct slopes.
It is possible to drive in metal, wood, or fiberglass posts. When driving in metal stakes, it is important to use a martyr. It is also possible to place a spike under the bell to create a pilot hole.
The VIBRESCOPIC II on MAV is based on a pre-drilled angle allowing the machine to be adapted according to the desired post height.
For optimal working comfort, all functions are controlled in the cabin or via remote control.
This choice of adapting the post driver to the carrier helps reduce the number of equipment or the creation and maintenance of vineyards.
It has been designed to adapt to the toughest soils thanks to a percussion hammer device with a power of 0 to 950 strokes/min, adjustable by the operator. The impact is triggered when the hammer, mounted on a cylinder and sliding along a slide, comes into contact with the post.
Its striking bell with a Ø of 150 mm guides the post throughout the driving process without damaging it.
The mast is tiltable by 20/25° to correct slopes.
It is possible to drive in metal, wood, or fiberglass posts. When driving in metal stakes, it is important to use a martyr. It is also possible to place a spike under the bell to create a pilot hole.
The VIBRESCOPIC II on MAV is based on a pre-drilled angle allowing the machine to be adapted according to the desired post height.
For optimal working comfort, all functions are controlled in the cabin or via remote control.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Vibrating post-driver on stilt tractor : VIBRESCOPIC MAV
Main Features
- Drives all posts in all types of grounds thanks to the exclusive power regulation of the striking controlled by the user
- Works in all positions: side shift, tilting and rotation.
- Excellent accuracy: the post is held during the work process.
- Small size during transport and operation (telescopic mast).
- Does not damage posts: power regulation.
- Manual controls by lever or radio remote control, or electro-hydraulic controls.
- Simple use : only one handle for lifting and lowering the hammer and for striking.
- Provides an excellent safety : the hammer vibrates only when the post is in direct contact with the striking head.
- Sturdy, forged, milled and processed striking head, Ø 150 mm (Ø 120 mm optional), 2 years warranty.
Technical characteristics
| Model |
| Post length (maxi.) |
| Striking head Ø |
| Percussion hammer |
| Hydraulic offset |
| Inner/outer mast tilt |
| VIBRESCOPIC on stilt tractor |
| Depends on the carrier |
| 150 mm |
| Adjustable from 0 to 950 strokes/min |
| 0.50 m for New Holland Braud - SB series only |
| 20° / 25° |
