Tilting mast post driver : TURBOFRAP 200
The TURBOFRAP 200 swinging mast pile driver is a model with a swinging mass and equipped with a 200° rotation to drive stakes to the right or left.
The post driver with a hammer TURBOFRAP on a tractor is ideal for creating fences in a simple and efficient manner.
The 160 kg hammer slides on a vertical mast before striking flat on the head of the stake with a power of 1618 joules/min. Grooved and concave, it ensures better grip and a better distribution of force to avoid splintering the stake. The stake, with a maximum length of 3 meters, is securely held by diabolos for optimal driving.
The pendulum model TURBOFRAP 200 makes it easier to work in rugged or hilly areas. It has an offset of 2.50 meters from the top, allowing it to work on slopes or over ditches. Its automatic leveling allows it to drive the stakes always straight.
A 200° rotation allows the operator to work on the right and left without maneuvering the tractor.
The 160 kg hammer slides on a vertical mast before striking flat on the head of the stake with a power of 1618 joules/min. Grooved and concave, it ensures better grip and a better distribution of force to avoid splintering the stake. The stake, with a maximum length of 3 meters, is securely held by diabolos for optimal driving.
The pendulum model TURBOFRAP 200 makes it easier to work in rugged or hilly areas. It has an offset of 2.50 meters from the top, allowing it to work on slopes or over ditches. Its automatic leveling allows it to drive the stakes always straight.
A 200° rotation allows the operator to work on the right and left without maneuvering the tractor.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Tilting mast post driver : TURBOFRAP 200
Main Features
- More than 200° rotation. the most important on the market.
- Posts from 0.45 m up to 3.00 m (3.50 m in option) always vertical.
- Maximum striking power: 1618 Joules/m with 160 kg mass.
- Hydraulic offset of 1 m, i.e. 2.50 m from the tractor centreline, for working on steep slopes, over obstacles such as ditches or embankments.
- Automatic upright setup
- Very compact machine with low centre of gravity allowing an excellent stability of the machine.
- Automatic linkage with supports.
- Hammer mounted on an anti-wear removable slide for a longer life.
Technical characteristics
| Model |
| Post length (mini. / maxi.) |
| Weight of the hammer |
| Striking power |
| Hydraulic offset |
| Dimensions (W x H) |
| Weight |
| Drive |
| Coupling |
| TURBOFRAP 200 |
| 0,45 m / 3,00 m (3,50 m in option) |
| 160 kg |
| 1618 joule/m |
| 2.50 m from the tractor axle |
| 2,21 x 2,86 m |
| 747 kg without hydraulic unit 821 kg with hydraulic unit |
| Tractor pump with 2 couplers Or PTO 540 rpm, 15L/min. pump, 40 L tank |
| 3-point automatic linkage with draw bar N°2 can be adjusted by screw |
