Mechanical edging grip : PM
Mechanical edging grip to fit on the arm of your lifting equipment. Ideal mechanical working method for civil engineering, civil engineering, landscapers...
This edging installation tool makes it easier to handle and install on exterior landscaping sites. Easy to use and operate, the operator only needs to adjust the clamp opening according to the width of the border: between 50 and 570 mm depending on the model, and place it above the material so that the carrier does the rest. The clamp, through a mechanical and automatic system, will tighten on the border, exerting increasing pressure as the lifting progresses.
Thanks to rubber pads for better grip, this mechanical clamp, with a lifting capacity of 500 to 900 kg depending on the model, offers the possibility to install concrete blocks, granite, or other materials.
The operator intervenes to guide the trajectory with a handle for more precise installation, an essential criterion for setting up borders in restricted areas or to comply with current safety and accessibility standards.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Mechanical edging grip : PM
Main Features
- Can be adapted on every lifting machine.
- Lays all kerbstones in concrete and granite from 50 mm up to 570 mm width (depending of the model).
- Hold by the kerbstones width.
- Lifting capacity : 500 or 900 kg.
- Manual control with automatic system opening / closing.
- Handles for an easy use.
Technical characteristics
Model |
Grip width |
Tightening width |
Holding depth |
Lifting power |
Weight |
PM 500 |
350 mm |
50 to 570 mm max. |
190 mm max. |
500 kg |
29 kg |
PM 900 |
420 mm |
50 to 500 mm max. |
170 mm max. |
900 kg |
56 kg |