Tilting mast post driver : MÂT VITI
Compact 95 cm post driver, ideal for vineyards. Posts driven by a 160 kg sliding mass mounted on a mast.
To meet the needs of viticulturists looking for a simple post driver, RABAUD has adapted its Mast ELEVEUR post driver into the VITI version.
This extremely compact post driver, 95 cm wide, is ideal for narrow vineyards (minimum row spacing of 1.00 m), whether they are flat, hilly, or rugged.
Thanks to its sliding weight of 160 kg mounted on a wear-resistant block, the post can be driven even in the toughest soils. Posts up to 3 m high can be driven.
A standard +/-15° hydraulic tilt allows for driving the posts vertically or installing inclined posts at the end of the row. Also, a hydraulic offset of 42.5 cm, or 1.09 m from the tractor's axis, allows for positioning posts or stakes in the center of the row.
As standard, the drive is provided by the tractor pump with 2 male ½-inch check valve couplers. Optionally, a hydraulic power unit with a flow rate of 10 l/min, driven by the 540 rpm PTO, can be added.
For added safety, the descent of the weight can only be triggered by a complete closure of the hydraulic post clamp and the simultaneous action of both hands on the controls. Also, in terms of safety, translucent polycarbonate shields are attached to this post clamp equipped with diabolos.
This extremely compact post driver, 95 cm wide, is ideal for narrow vineyards (minimum row spacing of 1.00 m), whether they are flat, hilly, or rugged.
Thanks to its sliding weight of 160 kg mounted on a wear-resistant block, the post can be driven even in the toughest soils. Posts up to 3 m high can be driven.
A standard +/-15° hydraulic tilt allows for driving the posts vertically or installing inclined posts at the end of the row. Also, a hydraulic offset of 42.5 cm, or 1.09 m from the tractor's axis, allows for positioning posts or stakes in the center of the row.
As standard, the drive is provided by the tractor pump with 2 male ½-inch check valve couplers. Optionally, a hydraulic power unit with a flow rate of 10 l/min, driven by the 540 rpm PTO, can be added.
For added safety, the descent of the weight can only be triggered by a complete closure of the hydraulic post clamp and the simultaneous action of both hands on the controls. Also, in terms of safety, translucent polycarbonate shields are attached to this post clamp equipped with diabolos.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Tilting mast post driver : MÂT VITI
Main Features
- Compact machine 95 cm – Easy work between rows.
- For driving posts up to 3.00 m.
- Hammer 160 kg: grooved and concave,for a better strike right on post head. The halyard can be adjusted.
- Standard: hydraulic offset (0.42 m). Hydraulic tilt +/- 15°.
- Post-clamp: hydraulic with guiding rollers for an excellent hold of the post during the driving process.
- Hammer lowering secured thanks to the hammer being relied on the post-clamping system.
- Drive through tractor’s pump with 2 hydraulic male couplers ½ or PTO 540 rpm, oil flow 10L/ min.
- 2 Stands for stability at work and storage.
Technical characteristics
| Model |
| Maximum post length |
| Weight of the hammer |
| Striking power |
| Hydraulic offset |
| Hydraulic tilting |
| Dimensions (L x W x H) |
| Weight without hydraulic unit |
| Weight with hydraulic unit |
| Drive |
| Coupling |
| MÂT VITI |
| 3 m |
| 160 kg |
| 1618 joule/m |
| 0,42 m (1.09 m from the tractor axle) |
| +/- 15° |
| 0,95 x 1,41 x 3,07 m |
| 490 kg |
| 550 kg |
| Pump tractor with 2 ½ male valve couplers or PTO hydraulic unit 540 rpm, flow 10 L/min., 30 L tank |
| Tractor 3-point linkage cat. n°2 with removable pins |
