Forestry mulching heads with mobile hammers for excavator
The forestry mulcher for excavators is ideal for cleaning up vegetation, making firebreaks, etc.
Thanks to their adaptation to excavators, providing them with a broad reach and enabling precise work, the XYLOR PE forest shredders are ideal for clearing and deforestation activities in challenging or steeply inaccessible areas.
Easy to handle with mini-excavator controls, navigate obstacles, and target areas for clearing without damaging the surrounding vegetation.
These grinding heads assist landscapers and communities in landscaping, maintaining green spaces, embankments, and road edges, but are also suitable for small-scale forestry operations, especially in wooded areas where a tractor is hardly feasible.
Equipped with mobile hammers, these forest shredders are ideal for grinding young shoots, brambles, or surface branches. Depending on the models, they can grind wood up to 140 mm in diameter over a width of 600 to 1400 mm in a single pass.
This wood shredder on an excavator is equipped with a self-leveling attachment that adapts to the irregularities of the ground, as well as an adjustable sensing roller. The latter, with its ground pressure, ensures a uniform cut on all types of sites.
Easy to handle with mini-excavator controls, navigate obstacles, and target areas for clearing without damaging the surrounding vegetation.
These grinding heads assist landscapers and communities in landscaping, maintaining green spaces, embankments, and road edges, but are also suitable for small-scale forestry operations, especially in wooded areas where a tractor is hardly feasible.
Equipped with mobile hammers, these forest shredders are ideal for grinding young shoots, brambles, or surface branches. Depending on the models, they can grind wood up to 140 mm in diameter over a width of 600 to 1400 mm in a single pass.
This wood shredder on an excavator is equipped with a self-leveling attachment that adapts to the irregularities of the ground, as well as an adjustable sensing roller. The latter, with its ground pressure, ensures a uniform cut on all types of sites.
- Do you want to know the availability of the product ?
- Would you like to request information or advice on this product ?
- Would you like to discover the machine near you, at a trade fair or at a reseller ?
On video : Forestry mulching heads with mobile hammers for excavator
Main Features
- For excavator from 2,5 to 16 Tons.
- HBC system (Hydraulic Block Control) allowing the hydraulic flow regulation, limits the pressure and allows rotor progressive braking.
- Rotor electronically balanced to real rotation speed for more durability.
- Helicoidal rotor with mobile hammers + one line of U-shape counter knives for optimal shredding (except XYLOR 603 and 803 models).
- Self-leveling intermediary coupling with fixed position (up to the XYLOG 1207 PE).
- Side shifting by belt (except for XYLOR 603 and 803, direct shaft).
- Case for the protection of hydraulic motor.
- Cast-iron gear hydraulic motor with drain line.
- Front protection with chains to avoid projections. Rear protection with rubber flap.
- Support pads with interchangeable and anti-wear material.
- Rear roller-feel adjustable in height.
- Anti-jet sheath for hydraulic hoses.
Technical characteristics
| Model |
| Excavator weight |
| Rotor type |
| Number of hammers |
| Counter-hammer line |
| Crushing width |
| Average grinding Ø |
| Helical rotor |
| Rotor Ø (without/with tools) |
| Roller-feeler |
| Cylinder capacity |
| Drain line |
| Drive |
| Oil flow recommended Oil flow max. |
| Pressure |
| Dimensions (L x W x H) without hitch |
| Weight (*intermediary linkage incl.) |
| XYLOR 603 PE |
| 2,5 to 3,5 Tons |
| Mobile hammers |
| 9 |
| No |
| 600 mm |
| 20 - 30 mm |
| Yes |
| 115 / 375 mm |
| Adjustable - Ø 140 mm |
| 14 cm³ |
| Yes |
| Direct |
| 35 L/min 50 L/min |
| 200 bar |
| 0,78 x 0,90 x 0,64 m |
| 158 kg* |
| XYLOR 803 PE |
| 2,5 to 3,5 Tons |
| Mobile hammers |
| 12 |
| No |
| 800 mm |
| 20 - 30 mm |
| Yes |
| 115 / 375 mm |
| Adjustable - Ø 140 mm |
| 14 cm³ |
| Yes |
| Direct |
| 35 l/min 50 l/min |
| 200 bar |
| 0,78 x 1,10 x 0,64 m |
| 185 kg* |
| XYLOR 1005 PE |
| 3,5 to 6 Tons |
| Mobile hammers |
| 16 |
| 1 |
| 1000 mm |
| 40 - 50 mm |
| Yes |
| 115 / 375 mm |
| Adjustable - Ø 140 mm |
| 22 cm³ |
| Yes |
| 2 belts |
| 45 l/min90 l/min |
| 200 bar |
| 0,90 x 1,18 x 0,60 m |
| 275 kg* |
| XYLOR 1207 PE |
| 6 to 9 Tons |
| Mobile hammers |
| 18 |
| 1 |
| 1200 mm |
| 50 - 60 mm |
| Yes |
| 115 / 375 mm |
| Adjustable - Ø 140 mm |
| 26 cm³ |
| Yes |
| 2 belts |
| 65 l/min150 l/min |
| 220 bar |
| 0,86 x 1,37 x 0,85 m |
| 470 kg* |
| XYLOR 1209 PE |
| 8 to 12 Tons |
| Mobile hammers |
| 12 |
| 1 |
| 1200 mm |
| 60 - 70 mm |
| Yes |
| 140 / 400 mm |
| Adjustable - Ø 165 mm |
| 36 cm³ |
| Yes |
| 3 belts |
| 80 l/min150 l/min. |
| 220 bar |
| 0,86 x 1,37 x 0,63 m |
| 460 kg |
| XYLOR 1013 PE |
| 9 to 16 Tons |
| Mobile hammers |
| 18 (mobile up to 360°) |
| 2 |
| 1000 mm |
| 140 mm |
| Yes |
| 420 mm |
| No roller-feeler |
| variable 35-46 cm³ |
| Yes |
| 4 belts |
| 85 to 110 l/min240 l/min. |
| 250 bar |
| 0,86 x 1,35 x 0,65 m |
| 460 kg |
| XYLOR 1413 PE |
| 9 to 16 Tons |
| Mobile hammers |
| 18 (mobile up to 360°) |
| 2 |
| 1400 mm |
| 140 mm |
| Yes |
| 420 mm |
| No roller-feeler |
| variable 35-46 cm³ |
| Yes |
| 4 belts |
| 85 to 110 l/min240 l/min. |
| 250 bar |
| 0,86 x 1,75 x 0,65 m |
| 600 kg |
